I'm designing for a client a Teams room system with 24 desktop mics, 8 channel mix-minus, and 4x PTZ30X-SDI cameras to have stored presets triggered depending on the active microphone.
I need to bring the 4 SDI into an IP or RS232 controllable 4x1 switch (such as Marshall VSW-2000) before connecting to an SDI to USB3 capture device for the Crestron UC engine.
Will I get seamless switching from the 4x1, and if not, could you make a recommendation?
thanks,
Jim
1 Comment
Andrew Chatfield
said
about 1 year ago
Hmm, I don't have any lists of SDI switchers with low switching time, I think you would have to test this one out yourself. If you do find one that works feel free to share here!
Jim Vanderwiel
I'm designing for a client a Teams room system with 24 desktop mics, 8 channel mix-minus, and 4x PTZ30X-SDI cameras to have stored presets triggered depending on the active microphone.
I need to bring the 4 SDI into an IP or RS232 controllable 4x1 switch (such as Marshall VSW-2000) before connecting to an SDI to USB3 capture device for the Crestron UC engine.
Will I get seamless switching from the 4x1, and if not, could you make a recommendation?
thanks,
Jim