Start a new topic

Specify Speed when sending 'Preset Call' command (HTTP-CGI)

We use the HTTP-CGI commands in OBS to select camera presets during our worship services.  We have the pan/tilt/zoom speeds set quite high so that the time required to get it in position is minimized.  We use a 'stinger' scene to hide this camera movement in our livestream.

Occasionally we would like to have the camera move between presets while live (i.e. no stinger).  In these cases, a much slower camera movement would be preferred.

The feature request here is to add an additional (optional) parameter to the 'ptzcmd&poscall' command to specify the speed.  When specified, this parameter would override the default MotionSync speed setting.  When omitted, the MotionSync speed as configured in the OSD would be used.


Example 1 - Slow speed (1)  to preset #3:

http://[Camera IP]/cgi-bin/ptzctrl.cgi?ptzcmd&poscall&3&1


Example 2 - Default (fast) speed to preset #2:

http://[Camera IP]/cgi-bin/ptzctrl.cgi?ptzcmd&poscall&2

Login or Signup to post a comment