This will show you how to determine the port to set on the SuperJoy for NDI control of a camera.


  1. Open PuTTY.exe and connect to the IP address of your camera through Telnet at port 5960, and click on the “Open” button:


  1. This will bring up a box with a lot of text like below:
  1. This is an HC-ETPZ-NDI with two NDI streams. One is EPTZ and one is Ref. ETPZ is on port 5961 and Ref is on port 5962. These are the ports to use with the SuperJoy.

If you need PuTTY, you can download it here.