General

General questions about the PTZoptics camera line.

I am looking for a system to steam and record our shows, can you recommend anything for this setup?
This is a guide I put together that goes over a (2) camera system setup to stream and record. It goes over everything you would need to get your system up a...
Mon, 20 Feb, 2017 at 2:32 PM
What kind of PoE do the PTZOptics SDI G2 cameras use?
The PTZOptics cameras are a Class 3 "Mid-Power" device using 802.3af. The average load usually falls between 7 - 9 Watts in testing during actual...
Wed, 15 Mar, 2017 at 10:12 AM
20X zoom test
this is an example of the ptzoptics 20x zooming 
Thu, 16 Mar, 2017 at 1:00 PM
2 Camera church setup.
please refer to attached document for information on a church setup with PTZ optics cameras.
Fri, 16 Jun, 2017 at 10:32 AM
How to control multiple cameras from 1 IR remote control.
If you own multiple PTZOptics cameras, you can set each one to be controlled independently from (1) IR remote control. The way to do this is to use the IR r...
Thu, 23 Aug, 2018 at 11:26 AM
Do you have a PDF for the bottom of the camera?
Yeah we do, you can find the PDF and DXF files attached below. 
Thu, 25 Oct, 2018 at 8:36 AM
Do you have any tips for color matching your cameras?
This video should go over the various ways you can try to color match your PTZOptics cameras.  https://live.ptzoptics.com/back-to-the-basics/color-match...
Mon, 29 Oct, 2018 at 11:23 AM
what are the new system select dial positions after the broadcast firmware update?
please refer to the chart below for the new dial positions for the system select dial after the broadcast firmware update. in order to change the framerate/...
Wed, 27 Feb, 2019 at 1:49 PM
How do I access the Broadcast framerates of your cameras? (1080p59.94, 1080p29.97, etc)
The first thing you would need is your cameras to be on the most recent firmware. This feature was added to our camera line in early to mid 2019 so getting ...
Fri, 21 Jun, 2019 at 12:12 PM
PT JOY G3 UDP TCP port number?
The PT JOY G3 uses port 1259 for UDP and 5678 for TCP control. There are actually the ports assigned to the cameras themselves, so when using a PTZoptics ca...
Thu, 18 Jul, 2019 at 10:08 AM