Quick Start Section

Quick Start documents to help you get up and running with your PTZOptics camera!

Setting up your PT-JOY-G3
The PT-JOY-G3 utilizes a VISCA based command set sent over TCP/IP for control; this article will cover basic setup for the PT-JOY-G3 joystick shown in the p...
Mon, 22 Jul, 2019 at 10:20 AM
How do I license a PTZOptics camera with NDI?
please note these steps are for cameras that are being upgraded to allow for NDI video and not the NDI model cameras. these steps would not apply to any cam...
Fri, 22 Feb, 2019 at 10:28 AM
Setting up my Gen 2 PTZOptics IP joystick
This article is a set of instructions to help you set up your PT-JOY-G2. SECTION 1: Equipment Making sure you have the right equipment for the job i...
Thu, 21 Feb, 2019 at 3:51 PM
How do I set the PTZOptics camera to be on my network?
How do I set up my PTZOptics camera to be “on my network”?  The first thing you are going to want to do to get your camera up and streaming on your netwo...
Mon, 6 Jan, 2020 at 11:00 AM
What you need to do to get your Producer Kit Plus up and running.
The PTZOptics Producer kit is plug and play with a few caveats.  You do need to download the newest driver for the Magewell (4) input SDI input card.  ...
Tue, 17 Dec, 2019 at 10:23 AM
How do I install your Control App on a MAC?
Here is the link for the app, download the MAC version of this. https://ptzoptics.com/ptz-app/  Once it is downloaded, you can double click on the insta...
Fri, 17 Jan, 2020 at 2:44 PM